Braid machine is also known as braid packaging machine, rolling curtain packaging machine. The tape braider is an automatic device that arranges semiconductor chips into the carrier tape for processing by subsequent equipment.
First, the braid machine is divided into many kinds, the most common braid machine is automatic braid machine and semi-automatic braid machine
Automatic braiding machine:
Automatic braiding machine is a kind of braiding machine which is automatically fed through the circular vibration plate and the direct vibration track, suitable for automatic braiding of various components, and the working efficiency is much faster than that of semi-automatic braiding machine.
Automatic braid machine is divided into: metal stamping braid machine, SMD tube material gravity slide braid machine, oscillating disk braid machine, tower inspection braid machine, XY team inspection braid machine and other models
Second, the characteristics of automatic braiding machine:
1. Packaging method: can automatically seal, automatically receive materials
2. The working efficiency speed depends on the speed of manual feeding and the size of the material, up to 7M/ min, the size of the workpiece is different, the carrying capacity per meter is also different.
3. It has the function of "automatic straightening" and backward counting, and can adjust the required width of the carrier belt freely.
4. Packaging width: range between 12 ~ 88mm, compatible with a variety of raw materials, black and clear load belt, suitable for a variety of hardware, IC, switch, LED, connector, shield and other patch products braid packaging.
5. No need for speed regulation, reciprocating sealing and continuous sealing (that is, continuous operation or inching operation), self-adhesive tape and heat sealing tape can be used;
6. There are two kinds of operation selection of knob operation panel and man-machine interface. The knob operation panel is simple and convenient, and the man-machine interface is more beautiful and concise
Third, semi-automatic braiding machine:
Semi-automatic braid machine is suitable for small batch packaging, is the manual feeding method to load SMD into the belt packaging, semi-automatic braid machine packaging application range is relatively wide, belongs to the general braid machine, the operation is relatively simple and convenient
Four, semi-automatic braid machine features:
1. Semi-automatic braiding machine has "inspection function", equipped with CCD detection system.
2. Quickly test the capacity value and resistance value of the chip, and screen the good and bad products.
3. With a common display, the liquid crystal display orders, mimicking the status of each control point, and can easily set and modify various parameter values, monitor various working conditions and their braid speed.
5. Working principle of braiding machine:
After the braid packaging machine is connected with the gas, if it is hot sealed packaging, let the knife rise to the appropriate temperature, and adjust the carrier belt and air pressure source.
The SMD element is placed into the carrier belt by manual method or automatic loading device.
As the motor rolls, pull the cover band and the forming carrier band to the package orientation. At this position, the cover belt is on the upload belt, and the two heated blades are pressed on the cover belt and the carrier belt; The cover band seals the SMD element port on the carrier band.
In this way, the purpose of SMD component packaging is achieved. Then the receiving tray rolls up the encapsulated carrier tape.
6. What are the uses of the braiding machine?
Braid machines are widely used in braid inspection and packaging of various electronic components, such as:
Chip capacitor, chip resistor, chip inductor, chip varistor, chip thermistor braid and so on.
The above content is the introduction and overview of the braid machine, hoping that we have a new understanding of the braid machine.